Fuel units for Burner capacity from 10 to1000 kW



All light oil pumps are suitable for two-pipe or one-pipe configuration.
Selected models are specially designed for low viscosity
kerosene fuels and B10 blend.
Other pressure ranges are available on request, don't hesitate to contact Suntec.
A range of connectors is available for solenoid valve models.


Choose your language to obtain the Technical Data sheet (file : *.pdf).

Basic models

AE     Pump with integral pressure regulator.

Pressure ranges : 7 - 14 / 8 - 28 bars.
Flow range @ 2850 rpm, 5 cSt, 10 bars :
40 - 130 l/h.


Technical Data Sheet


AN     Pump with a combination pressure regulator and piston cut-off valve.

Pressure ranges : 7 - 14 / 10 - 20 bars.
Flow range @ 2850 rpm, 5 cSt, 10 bars :
40 - 130 l/h.

 

Technical Data Sheet


Solenoid valve models - One step

 

AL     Pump with integral blocking solenoid valve with in-line cut-off function (according to DIN EN ISO 23553-1).

Pressure range : 8 - 15 bars.
Flow range @ 2850 rpm, 5 cSt, 10 bars :
40 - 130 l/h.


 

Technical Data Sheet


 

ALE     Pump with integral blocking solenoid valve with in-line cut-off function (according to DIN EN ISO 23553-1). This pump with nozzle line pressure relief device is specially designed for use with a nozzle incorporating a cut-off function.

Pressure range : 8 - 15 bars.
Flow range @ 2850 rpm, 5 cSt, 10 bars :
40 - 60 l/h.


 

Technical Data Sheet

 


 

AS     Pump with integral by-pass solenoid valve which controls the combination pressure regulator and piston cut-off valve (according to DIN EN ISO 23553-1).

Pressure ranges : 7 - 14 / 10 - 15 bars.
Flow range @ 2850 rpm, 5 cSt, 10 bars :
40 - 80 l/h.

 

 

Technical Data Sheet


AUV     This universal service pump is specially designed for the replacement market.
It replaces most AS47, ASV47, AL 35, ALV35 models for heating oil, B10 blend and kerosene applications.

You can find this pump in the Service Case adapted for all replacement.

Technical Data Sheet

Service Case


Solenoid valve models - Two steps

AP     Two steps basic model with two adjustable pressure ranges and one nozzle outlet.

Pressure ranges :
low mode : 8 - 15 bars,
high mode : 12 - 25 bars.
Flow range @ 2850 rpm, 5 cSt, 10 bars :
40 - 130 l/h.

 

Technical Data Sheet

AP2



Technical Data Sheet

AP

 

 


 

AT     Pump with two adjustable pressure ranges, one nozzle outlet and integral in-line solenoid cut-off (according to
DIN EN ISO 23553-1).

Pressure ranges :
low mode : 8 - 15 bars,
high mode : 12 - 25 bars.
Flow range @ 2850 rpm, 5 cSt, 10 bars :
46 - 130 l/h.


 


Technical Data Sheet

AT2

Technical Data Sheet

AT3


 

A2L     Pump with two nozzle outlets and two independant blocking solenoid valves with in-line cut-off function (according to
DIN EN ISO 23553-1). A single regulator delivers the same pressure for both nozzle lines.

Pressure range : 8 - 15 bars
Flow range @ 2850 rpm, 5 cSt, 10 bars :
40 - 130 l/h.

 

Technical Data Sheet